Wismec Sinuous V80 Kit

Wismec Sinuous V80 Kit
Out of Stock

Wismec brings us the Sinuous V80 kit! An awesome lightweight 80w mod and tank combo!
The Sinuous V80 is a sturdy & well built single 18650 battery mod. With 80w of vaping power in a very comfortable and slick form.
With a 0.91 inch OLED display that is bright enough to read in direct sunlight and can support atomizers up to 26mm.

The menu system is very easy to use.

A quick three clicks on the fire button brings up the Mode select.
Scroll through using the up and down buttons to set your desired output, Wattage, Bypass, TC-Ni, TC-Ti, or TC-SS.
Hold the Fire Button at the same time as the left button takes the device into stealth mode and turns off the screen.
Pressing both the left and right buttons locks the device
The Sinuous v80 is an awesome little mod, perfectly paired with the Amor NSE Tank.

The Amor NSE tank is a brilliant 3ml tank that is dead easy to setup and use.
With 1.3ohm coils this is perfect for higher strength vaping. The coils are easy to install. Just simply screw them into the base of the tank, fill, and vape! Grab a spare pack HERE!

Filling the Wismec Amor Tank couldn’t be simpler.

Slide back the top cover at the arrow until the cap goes back no further.
Once open you can use the juice slot to pour your eliquid into the tank
If you’re looking for a compact vape kit, look no further than the Wismec Sinuous V80 kit!


Wismec Sinuous V80 Specs:

Product Size: 27 x 34 x 81mm
Weight: 59.8g
Output Wattage: 1.0 -80 Watts
Output Modes: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR
Resistance range: 05-3.5ohm for VW/0.05-1.5ohm for TC
Display: 0.91” OLED Screen
Battery: Single 18650 (Not Included)
Output Voltage: 0.5 – 8V
Upgradable Firmware
26mm Atomiser without overhang
Wismec Amor NSE Tank Specs
Height: 46mm
Diameter: 26mm
WS04 and WS-M coils included
Adjustable Bottom Airflow
Slide across top fill
Locking and non locking top cap
Capacity: 3ml
Gold Plated 510 pin
Each box contains:
Wismec Sinuous V80 (Battery not included)
Wismec Armor NSE Tank (3ml capacity)
WS-M 0.27ohm coil (Pre-installed)
WS04 MTL 1.3ohm coil
Spare O-Rings
USB Cable
User manual
Warning Card

Write Your Own Review
You're reviewing:Wismec Sinuous V80 Kit
Your Rating